Cov voj voog hluav taws xob - teeb meem thiab kev daws teeb meem
1. R 1 , = 6 Ω, R 2 = R 3 = 2 Ω, thiab voltage = 14 volts, txiav txim siab qhov tam sim no hauv lub voj voog raws li qhia hauv daim duab hauv qab no.
Paub:
Tus Resistor 1 (R 1 ) = 6 Ω
Tus Resistor 2 (R 2 ) = 2 Ω
Tus Resistor 3 (R 3 ) = 2 Ω
Lub zog hluav taws xob (V) = 14 Volt
Xav tau: Fais fab tam sim no (I)
Tshuaj:
Tus resistor sib npaug (R):
R 2 thiab R 3 txuas nrog ua ke. Lub resistor sib npaug:
1/R 23 = 1/R 2 + 1/R 3 = 1/2 + 1/2 = 2/2
R 23 = 2/2 = 1 Ω
R 1 thiab R 23 txuas ua ke. Lub resistor sib npaug:
R = R 1 + R 23 = 6 Ω + 1 Ω
R = 7 Ω
Tam sim no hluav taws xob (I):
Kuv = V / R = 14 / 7 = 2 Amperes
2. Cov voj voog hluav taws xob raws li qhia hauv qab no, qhov twg muaj hluav taws xob loj dua.

Tshuaj:
Qhov tsis kam ntawm lub resistor yog R thiab qhov hluav taws xob voltage yog V.
Teb A.
R 1 , R 2 thiab R 3 txuas ua ke. Lub resistor sib npaug:
RA = R 1 + R 2 + R 3 = R + R + R = 3R
Tam sim no hluav taws xob (I):
![]()
Teb B.
R 1 , R 2 thiab R 3 txuas nrog ua ke. Lub resistor sib npaug:
1/R = 1/R 1 + 1/R 2 + 1/R 3 = 1/R + 1/R + 1/R = 3/R
R₂ = R₂ /3
Tam sim no hluav taws xob (I):

Teb C.
R 2 thiab R 3 txuas nrog ua ke. Lub resistor sib npaug:
1/R 23 = 1/R 2 + 1/R 3 = 1/R + 1/R = 2/R
R 23 = R/2
R 1 thiab R 23 txuas ua ke. Lub resistor sib npaug:
RC = R 1 + R 23 = R + R/2 = 2R/2 + R/2 = 3R/2
Tam sim no hluav taws xob (I):
![]()
Teb D.
R 1 thiab R 2 txuas nrog ua ke. Lub resistor sib npaug:
1/R 12 = 1/R 1 + 1/R 2 = 1/R + 1/R = 2/R
R 12 = R/2
R 12 thiab R 3 txuas ua ke. Lub resistor sib npaug:
R D = R 12 + R 3 = R/2 + R = R/2 + 2R/2 = 3R/2
Tam sim no hluav taws xob (I):
![]()
3. R 1 = 4 ohms, R 2 = 6 ohms, R 3 = 2 ohms, thiab V = 24 volts. Tam sim no hluav taws xob hauv lub voj voog raws li qhia hauv daim duab hauv qab no yog dab tsi.
Paub:
Tus Resistor 1 (R1 ) = 4 Ohm
Tus Resistor 2 (R2 ) = 6 Ohm
Tus Resistor 3 (R3 ) = 2 Ohm
Lub zog hluav taws xob (V) = 24 Volt
Xav tau: Lub zog hluav taws xob hauv Circuit
Tshuaj:
R 1 , R 2 thiab R 3 txuas ua ke. Lub resistor sib npaug:
R = R 1 + R 2 + R 3 = 4 + 6 + 2
R = 12 Ohm
Tam sim no hluav taws xob:
Kuv = V / R = 24 / 12 = 2 Amperes
4. Cov voj voog hluav taws xob raws li qhia hauv qab no, qhov twg muaj hluav taws xob loj dua.

tshuaj
Lub zog hluav taws xob hauv Circuit A.
Qhov sib npaug resistor:
R 1 = 3 Ω, R 2 = 4 Ω, R 3 = 4 Ω, V = 12 Volts
R 2 thiab R 3 txuas nrog ua ke. Lub resistor sib npaug:
1/R 23 = 1/R 2 + 1/R 3 = 1/4 + 1/4 = 2/4 = 1/2
R 23 = 2/1 = 2 Ω
R 1 thiab R 23 txuas ua ke. Lub resistor sib npaug:
R = R 1 + R 23 = 3 Ω + 2 Ω = 5 Ω
Tam sim no hluav taws xob (I):
Kuv = V / R = 12 / 5 = 2.4 Amperes
Lub zog hluav taws xob hauv Circuit B.
Qhov sib npaug resistor:
R 1 = 8 Ω, R 2 = 2 Ω, R 3 = 2 Ω, V = 36 Volts
R 1 , R 2 thiab R 3 txuas ua ke. Lub resistor sib npaug:
R = R 1 + R 2 + R 3 = 8 + 2 + 2 = 12 Ω
Tam sim no hluav taws xob (I):
Kuv = V / R = 36 / 12 = 3 Amperes
Lub zog hluav taws xob hauv Circuit C.
Qhov sib npaug resistor:
R 1 = 4 Ω, R 2 = 4 Ω, R 3 = 6 Ω, V = 12 Volts
R 2 thiab R 3 txuas nrog ua ke. Lub resistor sib npaug:
1/R 23 = 1/R 2 + 1/R 3 = 1/4 + 1/4 + 1/6 = 3/12 + 3/12 + 2/12 = 8/12
R 23 = 12/8 = 1.5 Ω
Tam sim no hluav taws xob (I):
Kuv = V / R = 12 / 1.5 = 8 Amperes
Lub zog hluav taws xob hauv Circuit D.
Qhov sib npaug resistor:
R 1 = 3 Ω, R 2 = 3 Ω, R 3 = 3 Ω, R 4 = 3 Ω, R 5 = 6 Ω, V = 24 Volts
R 2 , R 3 thiab R 4 txuas nrog ua ke. Lub resistor sib npaug:
1/R 234 = 1/R 2 + 1/R 3 + 1/R 4 = 1/3 + 1/3 + 1/3 = 3/3
R 234 = 3/3 = 1 Ω
R 1 , R 234 thiab R 5 txuas nrog ua ke. Lub resistor sib npaug:
R = R 1 + R 234 + R 5 = 3 + 1 + 6 = 9 Ω
Tam sim no hluav taws xob (I):
Kuv = V / R = 24 / 9 = 2.6 Amperes
5. Raws li daim duab raws li qhia hauv qab no, txiav txim siab:
A. Tag nrho cov kev tiv thaiv
B. Tam sim no hluav taws xob hauv lub voj voog
C. Tam Sim No Kuv 1
D. Tam Sim No Kuv 2
Paub:
Tus Resistor 1 (R 1 ) = 4 Ω
Tus Resistor 2 (R 2 ) = 4 Ω
Tus Resistor 3 (R 3 ) = 2 Ω
Tus Resistor 4 (R 4 ) = 3 Ω
Hluav taws xob fais fab (V) = 12 Volts
Tshuaj:
A. Tag nrho cov kev tiv thaiv (R)
Resistor R 2 thiab resistor R 3 txuas ua ke. Lub resistor sib npaug:
R 23 = R 2 + R 3 = 4 Ω + 2 Ω = 6 Ω
Resistor R 23 thiab resistor R 4 txuas ua ke. Lub resistor sib npaug:
1/R 234 = 1/R 23 + 1/R 4 = 1/6 + 1/3 = 1/6 + 2/6 = 3/6
R 234 = 6/3 = 2 Ω
Resistor R 1 thiab resistor R 234 txuas ua ke. Lub resistor sib npaug:
R = R 1 + R 234 = 4 Ω + 2 Ω = 6 Ω
Tag nrho cov tsis kam yog 6 ohms.
B. Tam sim no hluav taws xob hauv lub voj voog (I)
V = IR
V = hluav taws xob voltage, I = hluav taws xob tam sim no, R = hluav taws xob tsis kam
Tam sim no hluav taws xob:
Kuv = V / R = 12 Volts / 6 Ohms = 2 Amps
C. Tam sim no hluav taws xob I 1
Tam sim no hluav taws xob hauv resistor R 1 = tam sim no hluav taws xob hauv Circuit Court = 2 Ampere.
D. Tam Sim No Kuv 2
Tus R Resistor23 thiab resistor R4 txuas nrog ua ke. Qhov sib npaug resistor R234 = 2 Ohms. 
Tam sim no hluav taws xob hauv resistor R 234 = tam sim no hluav taws xob hauv resistor R 1 = 2 Ampere.
Lub zog hluav taws xob hauv resistor R 234 yog:
V = IR 234 = (2 A)(2 Ohm) = 4 Volts
Qhov hluav taws xob hauv resistor R 234 = qhov hluav taws xob hauv resistor R 4 = qhov hluav taws xob hauv resistor R 23 = 4 Volts.
Qhov sib npaug resistor R 23 yog 6 ohm.
Lub zog hluav taws xob hauv resistor R 23 yog:
Kuv = V / R = 4 Volts / 6 Ohms = 2/3 Ampere
Tam sim no hluav taws xob hauv resistor R 23 = Tam sim no hluav taws xob hauv resistor R 2 = Tam sim no hluav taws xob hauv resistor R 3 = 2/3 Ampere.
6. R 1 = R 2 = 10 Ω thiab R 3 = R 4 = 8 Ω. Tam sim no hauv lub voj voog raws li qhia hauv daim duab hauv qab no yog dab tsi?
Paub:
Tus Resistor R 1 = Tus Resistor R 2 = 10 Ω
Tus Resistor R 3 = Tus Resistor R 4 = 8 Ω
Hluav taws xob fais fab (V) = 12 Volts
Xav tau: hluav taws xob tam sim no (I)
Tshuaj:
Qhov sib npaug resistor
Resistor R 3 thiab resistor R 4 txuas nrog parallel, qhov sib npaug resistor:
1/R 34 = 1/R 3 + 1/R 4 = 1/8 + 1/8 = 2/8
R 34 = 8/2 = 4 Ω
Cov resistors R 1 , R 2 thiab R 34 txuas nrog ua ke, qhov sib npaug ntawm cov resistor:
R = R 1 + R 2 + R 34 = 10 Ω + 10 Ω + 4 Ω = 24 Ω
Tam sim no hluav taws xob:
Kuv = V / R = 12 Volts / 24 Ohms = 0,5 Volts/Ohms = 0.5 Amps
7. Yog tias qhov tsis kam sab hauv ntawm lub roj teeb raug tsis quav ntsej, qhov hluav taws xob tam sim no hauv lub voj voog raws li qhia hauv daim duab hauv qab no yog dab tsi.
Paub:
Tus Resistor R 1 = 3 Ohm
Tus Resistor R2 = 3 Ohm
Tus Resistor R 3 = 6 Ohm
Hluav taws xob fais fab (V) = 6 Volts
Xav tau: Fais fab tam sim no (I)
Tshuaj:
Sib npaug resistor
Cov resistors R 1 thiab R 2 txuas ua ke. Cov resistor sib npaug:
R 12 = R 1 + R 2 = 3 Ohms + 3 Ohms = 6 Ohms
Resistor R 12 thiab resistor 3 txuas ua ke. Lub resistor sib npaug:
1/R = 1/R 12 + 1/R 3 = 1/6 + 1/6 = 2/6
R = 6/2 = 3 Ohms
Tam sim no hluav taws xob:
Kuv = V / R = 6 / 3 = 2 Amperes
8. Tag nrho cov hluav taws xob tam sim no hauv lub voj voog raws li qhia hauv daim duab hauv qab no yog dab tsi.
Paub:
Tus Resistor R 1 = 6 Ohm
Tus Resistor R 2 = 4 Ohm
Tam sim no hluav taws xob (V) = 6 Volt
Kev tiv thaiv sab hauv (r) = 0.6 Ohms
Xav tau: Lub zog hluav taws xob
Tshuaj:
Resistor R 1 thiab resistor R 2 txuas ua ke. Lub resistor sib npaug:
1/R P = 1/R 1 + 1/R 2 = 1/6 + 1/4 = 4/24 + 6/24 = 10/24
R P = 24/10 = 2.4 Ohm
Resistor R P thiab sab hauv tsis kam (r) txuas ua ke. Qhov sib npaug resistor:
R = RP + r = 2.4 Ohm + 0.6 Ohm = 3.0 Ohm
Tam sim no hluav taws xob hauv Circuit Court:
Kuv = V / R = 6 Volts / 3 Ohms = 2 Amps
- Lub voj voog hluav taws xob yog dab tsi?
- tebIb lub voj voog hluav taws xob yog ib txoj kev kaw lossis lub voj voog uas cov hluav taws xob tuaj yeem ntws tas li. Feem ntau nws muaj cov chaw ntawm lub zog (xws li roj teeb), cov khoom thauj (xws li resistors, LEDs, motors), thiab cov conductors los txuas lawv.
- Dab tsi txawv ntawm lub voj voog series thiab lub voj voog parallel?
- tebHauv ib lub voj voog series, cov khoom sib txuas ua ke txij thaum pib mus txog thaum kawg, yog li ntawd muaj ib txoj kev rau tam sim no. Hauv ib lub voj voog parallel, cov khoom sib txuas ua ke hla cov ntsiab lus sib xws lossis kev sib tshuam, muab ntau txoj kev rau tam sim no.
- Txoj Cai Ohm cuam tshuam li cas rau qhov voltage, current, thiab resistance hauv ib lub circuit?
- teb: Txoj Cai Ohm hais tias tam sim no () ntws los ntawm tus neeg xyuas hluav taws xob ntawm ob lub ntsiab lus yog ncaj qha proportional rau lub voltage () hla ob lub ntsiab lus thiab sib piv rau qhov tsis kam (). Nws yog sawv cev raws li .
- Lub luag haujlwm ntawm lub qhov hloov pauv hauv lub voj voog hluav taws xob yog dab tsi?
- tebIb lub qhov hloov (switch) tswj qhov ntws ntawm cov hluav taws xob hauv ib lub voj voog. Thaum kaw, nws cia cov hluav taws xob ntws; thaum qhib, nws cuam tshuam lossis nres qhov ntws ntawm cov hluav taws xob.
- Vim li cas lub luv luv Circuit thiaj suav tias yog qhov txaus ntshai?
- tebHauv lub voj voog luv luv, qhov tsis kam yog qis heev, ua rau muaj hluav taws xob ntau heev. Qhov no tuaj yeem ua rau kub dhau, hluav taws, lossis puas tsuaj rau cov khoom thiab yuav tsum tau tiv thaiv nrog fuses lossis circuit breakers.
- Lub luag haujlwm ntawm lub fuse lossis lub circuit breaker hauv lub circuit yog dab tsi?
- tebCov fuses thiab circuit breakers yog cov khoom siv tiv thaiv uas tsim los cuam tshuam lub circuit yog tias tam sim no tshaj qhov qib kev nyab xeeb uas tau teem tseg. Thaum cov fuses "tawg" lossis "yaj", ua rau lub circuit tawg, cov circuit breakers "trip", thiab tuaj yeem rov pib dua tom qab lawv cuam tshuam lub circuit.
- Kirchhoff Txoj Cai Lij Choj Tam Sim No (KCL) piav qhia li cas txog cov dej ntws ntawm qhov sib tshuam hauv lub voj voog?
- tebTxoj Cai Lij Choj Tam Sim No ntawm Kirchhoff hais tias qhov sib npaug ntawm cov hluav taws xob uas nkag mus rau hauv qhov sib tshuam yog sib npaug rau qhov sib npaug ntawm cov hluav taws xob uas tawm hauv qhov sib tshuam ntawd. Qhov no yog ib qho lus hais txog kev txuag hluav taws xob.
- Qhov txawv ntawm AC (Alternating Current) thiab DC (Direct Current) yog dab tsi?
- tebDC yog hais txog qhov ntws ntawm cov hluav taws xob uas tig mus rau ib sab, feem ntau yog los ntawm lub roj teeb lossis lub zog DC. AC, ntawm qhov tod tes, yog cov hluav taws xob uas hloov pauv kev taw qhia tas li, zoo li qhov tau txais los ntawm lub zog fais fab hauv ntau lub tebchaws.
- Lo lus "av" txhais li cas hauv cov hluav taws xob circuits?
- teb"Av" txhais tau hais tias yog ib qho chaw siv rau hauv ib lub voj voog hluav taws xob uas lwm cov voltages raug ntsuas los ntawm, lossis ib txoj kev rov qab los rau cov hluav taws xob tam sim no, lossis kev sib txuas ncaj qha rau lub ntiaj teb.
- Vim li cas cov capacitors siv rau hauv cov hluav taws xob circuits?
- tebCov Capacitors khaws thiab tso tawm lub zog hluav taws xob. Lawv siv rau hauv cov voj voog rau ntau lub hom phiaj, xws li lim, ua kom du qhov hloov pauv ntawm qhov hluav taws xob, txuas thiab decoupling AC teeb liab, thiab cov ntsiab lus sijhawm hauv oscillators.