1.
Pinnu agbara ina ninu iyika (1 µF = 10 -6 F)
A mọ̀:
Resistor (R) = 12 Ohm
Inductor (L) = 0.075 H
Kapasito (C) = 500 µF = 500 x 10 -6 F = 5 x 10 -4 Farad
V oltage (V) = V o sin ω t = V o sin 2πf t = 26 sin 200t
A nfẹ: Ina ina
Ojutu:
Impedance (Z):
Ìfàsípò inductive (X L ) = ωL = (200)(0,075) = 15 Ohm
Ìfàsípò capacitive (XC ) = 1 / ωC = 1 / (200)(5 x 10 -4 ) = 1 / (1000 x 10 -4 ) = 1 / 10 -1 = 10 1 = 10 Ohm
Resistor (R) = 12 Ohm
Ina agbara (I) :
I = V / Z = 26 Volts / 13 Ohms
I = 2 Volts/Ohm
I = 2 Amp
2. Tí ìdènà ìyípo náà bá jẹ́ 250 Ω, pinnu ìdènà ìdènà ìdènà R.
A mọ̀:
Idena ti iyipo naa (Z) = 250 Ω
Kapasito (C) = 8 m F = 8 x 10 -6 F
Inductor (L) = 0.8 H
Fólítì (V) = 200 Fólítì
w = 500 rad/s
A nfẹ : Resistor ti resistor (R)
Ojutu:
3. Pinnu iyatọ ti o le waye laarin awọn eti mejeeji ti inductor naa.
A mọ̀:
R = 40 W
X L = 150 W
X C = 120 W
V = 100 Folti
Ti a fe: iyatọ ti o pọju
Ojutu:
Àpapọ̀ impedance Z ti Circuit naa:
Iyatọ ti o ṣeeṣe ti awọn eti mejeeji ti inductor:
