အလျားလိုက်စက်ဝိုင်းတွင် တစ်ပြေးညီရွေ့လျားမှု - ပြဿနာများနှင့် ဖြေရှင်းချက်များ

1. A 0.2-kg ball, attached to the end of a horizontal cord, is revolved in a circle of radius 1 meter and ball’s maximum speed is 10 rpm. What is the magnitude of the ဗဟိုဗဟိုအရှိန်မြှင့်ခြင်း and the magnitude of the tension force?

လူသိများသည် :

mass (မီတာ) = ၅ ကီလိုဂရမ်

Radius (r) = 1 m

ကျီးကန်းပြင်အလျင် (ω) = 10 rev/min = 10 rev/60 s = 0.17 rev/s = (0.17)(6.28 rad)/s = 1 rad/s

အလျင် (v) = r ω = (၀.၀၂ မီတာ)(၀.၁ rad/s) = ၀.၀၀၂ မီတာ/s

လိုချင်သည် : as dan ΣF

ဖြေရှင်းချက်

(a) The magnitude of the centripetal acceleration

Uniform motion in a horizontal circle – problems and solutions 1

(b) The magnitude of the tension force

ΣF = မာ

T = m as

T = (၁၀ ကီလိုဂရမ်)(၁၀ မီတာ/စက္ကန့်2)

T = 0.2 kg m/s2

T = 0.2 N

လည်းကြည့်ရှုပါ  အပူ၏ စက်ပိုင်းဆိုင်ရာ ညီမျှမှု – ပြဿနာများနှင့် ဖြေရှင်းချက်များ

2. A 1-kg ball at the end of a string is revolving uniformly in a horizontal circle of radius 1 m. The cord will break when the tension in it exceeds 100 N. What is the maximum speed the ball can have?

လူသိများသည် :Uniform motion in a horizontal circle – problems and solutions 2

အလေးချိန် (m) = 1 kg

အချင်းဝက် (r) = 1 မီတာ

Tension force (T) = centripetal အင်အား (ΣF) = 100 N

Wanted: v maximum

ဖြေရှင်းချက်

Uniform motion in a horizontal circle – problems and solutions 3

လည်းကြည့်ရှုပါ  Isothermal thermodynamic processes - problems and solutions

[wpdm_package id='499′]

  1. အလေးချိန်နှင့် ထုထည်
  2. ပုံမှန်ခွန်အား
  3. နယူတန်ရဲ့ ရွေ့လျားမှုဆိုင်ရာ ဒုတိယနိယာမ
  4. ပွတ်တိုက်အား
  5. ပွတ်တိုက်အားမရှိဘဲ အလျားလိုက်မျက်နှာပြင်ပေါ်တွင် ရွေ့လျားခြင်း
  6. The motion of two bodies with the same acceleration on the rough horizontal surface with a friction force
  7. Motion on an inclined plane without friction force
  8. ပွတ်တိုက်အားနှင့်အတူ ကြမ်းတမ်းသော စောင်းနေသော မျက်နှာပြင်ပေါ်တွင် ရွေ့လျားမှု
  9. ဓာတ်လှေကားထဲမှာ လှုပ်ရှားမှု
  10. အရာဝတ္ထုများ၏ ရွေ့လျားမှုကို ကြိုးများနှင့် ဘီးများဖြင့် ချိတ်ဆက်ထားသည်
  11. အရှိန်အဟုန်တူညီသော အရာဝတ္ထုနှစ်ခု
  12. ပြားချပ်ချပ်မျဉ်းကွေးကို ဝိုင်းခြင်း – စက်ဝိုင်းပုံရွေ့လျားမှု၏ ဒိုင်းနမစ်
  13. စောင်းနေသော မျဉ်းကွေးကို လုံးခြင်း – စက်ဝိုင်းပုံ ရွေ့လျားမှု၏ ဒိုင်းနမစ်
  14. အလျားလိုက်စက်ဝိုင်းတွင် တစ်ပြေးညီရွေ့လျားမှု
  15. တစ်ပြေးညီစက်ဝိုင်းပုံရွေ့လျားမှုတွင် ဗဟိုခွာအား

a Comment ချန်ထား